This Bitmo B-Verb kit for your Epiphone Valve Junior amp head or combo (Version 2 or 3) contains all of the parts and instructions necessary to add reverb. It does not use a spring tank. It uses a tube driven, patent-pending digital reverb emulation chip set. It works well with other BitMo mod kits (Tweaky, Trio, etc.) or most other popular mod kits. Instructions are included to help you integrate it with alien mods. The BitMo B-verb provides classic wet reverb. It works well with clean surf, country or jazz tones, and even overdriven classic rock. The new REVERB LEVEL knob controls the amount of reverb in the mix. Recommend tube upgrades: Standard: One JJ 12AX7 and one medium bias JJ EL84 Creamy Overdrive Distortion: One Tungsol 12AX7 and one low bias JJ EL84 Note: BitMo kits do not include tubes. Warnings, etc: There can be some dangerous voltages in tubes amps so be careful! Always unplug the amp while working on it. You should also use goggles or glasses while soldering. I disavow any responsibility for damage, injury or lost hours. The instructions are simple enough for a novice. You experts should be able to figure it out. Skills needed - must be able to solder and drill a hole in the metal chassis. Tools you will need - screwdriver, tiny eyeglass screwdriver, a low-wattage soldering iron, rosin core solder, wire stripper, needle nose pliers, drill and bits, black tape. Click image to enlarge Availability: Usually ships within 24 hours. |
 Top of Page The easiest way to buy vacuum tubes. |